Review: Fascinations Model Earth – Tiger I Tank

Today I’m taking a look at a very different kind of model to take a little breather from the Warhammer and WH40k universe. The Tiger I Tank by Fascinations‘ Model Earth series has been a blast to assemble thus far and I’m sure I’ll have some challenging times that will give me a few droplets of sweat when I come close to completion. Hop in to see what I think about the kit.

Let me begin with an awesome video display of this model. I guess when you have metallic sound effects and Christopher Nolan’s Batman series background music, you can’t go wrong:

Alright! Now that we’re psyched let’s take a look at the package and its contents.

The model comes on two sprues (or metal sheets, you name it) with at times very small pieces to work with. I have worked with smaller pieces before when I assembled model airplanes in the past but I guess this takes the cake in making me flinch as I cut out the pieces one by one for assembly. Remember that these pieces are all metal and are a lot more resilient than plastic, so make sure you use a dedicated cutter for this. The details on the engraved parts are very satisfactory as you can see a camo pattern and company markings on various spots of the tank. The website classifies the model in the challenging category, so I happily went to work on the model.

All pieces have connecting inlets and outlets that can be bent or twisted to secure in position (also laid out by the assembly manual). Since the sheets are straight coming out of the box, all pieces that are round have to be bent preferably with a soft tool that wouldn’t scratch the shiny surface. I worked with the alligator toothed pliers and my hobby knife to begin with and bent the pieces mostly by hand or with the help of a pen or brush to roll sheets over.

As said, some of the pieces here are quite small, so be careful when handling them as they can get lost on a carpet or so easily. Luckily I had my neodymium magnets at hand and could locate the pieces easily. Here’s a size comparison with the craft knife:

Once you get the hang of it, everything becomes natural. I finished the superstructure in one sitting and expect to complete the model next time I handle it. Here are some work in progress shots.

Since metal sheets are quite flexible it may at times get frustrating to get straight pieces bent due to mishandling (such as the cables on the superstructure). I also had an almost broken piece due to bending sides for too many times, thus it may be a good idea to decide on the pose and bend every piece once just to be sure. Lastly, be sure to keep the remaining sprue away from your hands once parts are clipped. The attaching vents are razor-sharp and can give you cuts easily. Hell, the parts themselves probably left quite a few micro-cuts on my fingers when I was handling them!

All in all the model is fun to work with and challenging enough to keep it interesting. The company has a range of models for tanks, aircraft and landmarks, even Mass Effect and Star Wars related models with varying difficulties. This means the hobby is quite accessible for people of all skill levels. Priced at around $15 in Turkey, I think it’s a pretty good deal to have a model of such detail and ease of access, so I recommend giving the product a try and see for yourself.

Reception: ♦♦♦♦◊ Good!

See you on the next post and happy modelling!

If only I had Wittman as a model too…

 

Advertisements

4 comments

  1. Pretty cool stuff.
    Not really sure what scale the model is though- it looks slightly bigger than 15mm…

    No way to cut off some commander looking guy and stick him in the turret for Wittman?
    Then you’ll need some allied tanks to blast.
    🙂

    Like

    1. Thanks for dropping by!

      The model is quite small, about 13-15cm in length, which makes things a little dodgy. I’ll post some pics with GW models when I prepare the showcase post.

      I’m too lazy to carve out a Wittman model next to it but your suggestion makes sense. Thanks!

      Like

  2. Hey Roemer! Looks great…I don’t know if I could handle that model. I’d end up in the hospital. I cut myself just looking at 40k models sometimes! I guess you do a lot of chaos so are a bit more careful :).

    If you can, put the tank next to a 40k model for scale reference!

    Like

    1. The reference pictures are underway, I’ve completed the project and it looks pretty good already! Look for this space tomorrow.

      I first thought I’d use the remaining sprue bits as barbed wire for other models… they’re that sharp. Then I rolled them up and threw out of course. It’s a hazard for the bird!

      Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s